ATM局域网仿真体系结构的研究

本文在简要叙述了基于ＡＴＭ技术进行局域网仿真的原理后，对局域网仿真体系结构作了一些探讨。考虑的重点是无连接服务和群播功能的实现     

气—液式热管换热器在硫酸工业中的应用研究

本文研制的气－液式热管换热器应用于硫酸生产中ＳＯ３气体的余热回收。它具有传热性能好、流动阻力小、寿命长、体积小、节能效果显著和易清垢等优点。     

φ100mm定径机轧辊孔型设计改进

针对定径机换辊后定径钢管所出现的质量问题,提出了成品机架的轧辊孔型不分配变形量和适当增大孔型直径的改进措施。     

欧盟邻苯二甲酸盐新规明年实施

欧盟最新颁布的关于邻苯二甲酸盐的新指导标准（第2005／84／EC），将于2007年1月16日起开始执行。     

温州城市河道生态调水控制性工程设置与效果分析

生态调水可以减轻河道水污染,通过对几年来生态调水问题的研究,提出相应的对策。为改善调水效果、节约水量,在内河增设控制闸坝,并对其调水效果进行计算分析。结果表明新增闸坝对部分调水效果有一定程度改善,并能节约一定水量。     

Development and Commercial Application of a Novel Catalyst DVR—1 for Catalytic Cracking of Daqing Vacuum Residue

A newly developed catalyst type DVR-1 for catalytic cracking of Daqing vacuum resid was put into use in a commercial VRFCC unit,This catalyst features uniquely active matrix and modified ultra-stable zeolite.The commercial application results show that the DVR-1 type catalyst has the advantage of high heavy oil conversion,good metal tolerance nd gooed stability for catalyst regeneration,The FCC tests have shown Favorable product distribution,acceptable product quality and enormaous economic benefits whe processing the feedstock containin 75%-100% Daqing VR.     

巯基棉预浓集—中子活化法测定水泥及其浸出水中的微量汞

在不同酸度下巯基棉可以从溶液中富集和分离Au、As、Ag、Br、Cu、Ca Co、InHg、Ni、Se、Sb、Sn、Pb、W、Fe和In等30多种元素。由于用巯基棉吸附待测元素后不必洗脱,因此大大提高了富集能力,可用于海水、地下水、地表水及工业废水中一些元素的测量。本文用巯基棉富集后进行中子活化分析测定水泥及其浸出水中的汞。     

Motion Planning for Redundant Manipulators Using a Floating Point Genetic Algorithm

This paper deals with the trajectory planning problem for redundant manipulators. A genetic algorithm (GA) using a floating point representation is proposed to search for the optimal end-effector trajectory for a redundant manipulator. An evaluation function is defined based on multiple criteria, including the total displacement of the end-effector, the total angular displacement of all the joints, as well as the uniformity of Cartesian and joint space velocities. These criteria result in minimized, smooth end-effector motions. Simulations are carried out for path planning in free space and in a workspace with obstacles. Results demonstrate the effectiveness and capability of the proposed method in generating optimized collision-free trajectories.     

ZJ510L-B汽车用高强度热轧板的试制

珠钢150t电弧炉-LF(VD)-CSP(紧凑式带材生产)流程试生产的5～8mm ZJ510L-B(0．16C--1．22Mn)汽车用高强度热轧板的铁素体晶粒尺寸为6．0～9．2μm，带状组织为1．5～2．5级，强度极限σb562～610MPa，延伸率δ5 32．0％～38．6％。文中还分析和提出了带状组织的形成原因和改进措施。